Rigger Level 3 Course in Islamabad

Introduction:
This level of training rounds out the technical knowledge for the person who must ensure that all aspects of the rigging job
are properly assessed and that safety is assured. Three days of in-depth technical training followed by two days of hands-
on exercises and practical exams to reinforce the skills learned.

Course Outline:
• Introduction
• International Health and Safety Passport
• LOLER, PUWER, Standards
• Roles and Responsibilities of Lifting Personnel
• Lifting Accessories (Safe use, inspection, and discard criteria)
• Lifting Appliance (Safe use, inspection, and discard criteria)
• Load (Weight Calculation, CoG, Lifting Points etc.)
• Wire Rope Inspection
• Appointed Person Rigging
• Cranes
• Crane Selection
• Crane Operation
• Method of Slinging
• Subsea Lifting Operation
• Winch and Pulling Operation
• Rigging Loft Management
• CCU’s
• Man Riding Operation
• Overhead Gantry Cranes
• Lifting Plan
• Drawing
• Theory Assessment

Rigger Level 2 Course in Islamabad

Introduction:
Rigger Level 2 training provides the knowledge and skills necessary for a person to work as a journeyman level rigger.
This course prepares persons to perform rigging calculations and to select and apply rigging for safe controlled load
handling. As of November 2010 all “Signal Persons” and “Riggers” must be qualified in accordance with OSHA 1926 Sub
part CC. Persons completing this training will understand their responsibility to ensure proper rigging methods are used
and that all variables which could result in a rigging failure are accounted for through planning and proper selection of
gear. Training satisfies the qualification requirements for OSHA 1926, 1910, and other required qualifications.

Course Outline:
An in-depth review of all Rigger Level 1 topics
Types of slings
Proper selection of slings
Types of hardware/rigging gear
Proper selection of hardware and gear
Below-the-hook lifting devices
Hooks
Types of hitches
D/d ratio
Using working load limit tables
Calculating load weight
Load force considerations
Locating the horizontal and vertical center of gravity
Calculating sling stress for symmetrical and non-symmetrical loads
Determining sling length
Rigger/personnel safety And, much more…

Rigger Level 1 Course in Islamabad,pakistan
Introduction:

This 7 hour online course covers OSHA regulations, the use and inspection of slings, rigging hardware, load weight and other
areas critical to understanding and operating a safe job site. This course is recommended for all employees who are working
within the fall zone of a load and especially if they are involved in the hooking and unhooking of the load or in the guiding of a load. Level 1 certification training program combines in-class content with practical experience. Students receive classroom
theory and hands on practical training including calculating load weights, finding load center of gravity, rigging loads
and making actual crane lifts giving direction to the crane operator.The goal of the Level 1 training program is to equip
you for a safe career as a knowledgeable and confident rigger.

Course Outline:
Crane and hoisting hand signals
Load weight estimation
Location of the load center of gravity
Rigging hardware and appropriate uses
Rigging hardware inspection and rejection criteria
Use of rigging tables to select appropriate hardware for hoisting Sling angle capacity calculation
Care and storage of rigging hardware Common hazards and safety around cranes and overhead hoists
Lift planning and advanced topics awareness Your job chances will be high and their will be also

difference in salary as compare to who dont have a diploma All diploma is attested from ministry of foreign affairs and
Technical board . Also Online record Of diploma will be on institute web site.And Also we have Medical related diploma
for those who have experience in medical field .

24/7 Whatsapp Line Whatsapp: O3O3-553O865, O32196O6785 Khanna pul Rawalpindi (IPATS-IPATS-IPATS) Whatsapp: O3O3-553O865, O32196O6785 Khanna pul Rawalpindi